|
|
|
 |
PRODUCTS DISPLAY |
|
|
|
|
| PP water film deduster |
|
| Date: 2008-5-10 Hits: 1349 Print this page Back |
|
Working Principles
PP water film deduster is composed with Main tube, Top water injection tank, Bottom spillway, cleaning hole and so on. The working principle is: The tube is round. The water enters the tube from the top water injection tank and makes a membrane flowing from the top to the bottom. The flue gas enters from the bottom of the tube and rises with rotating movement. The flue gas always rubs the water membrane in the tube under the centrifugal force. The water membrane moistens the flue gas and the dust flows with water to the bottom of the deduster. Then the dust will be discharged from the spillway. The bottom of the tube is sealed and water sealed tank is set to prevent the smoke to leak from the bottom.Cleaning hole is used to clean the bottom of the tube. The sewage after dedusting will be discharged from the bottom spillway into sedimentation tank to be counteracted and precipitated. Then it can be used circularly. The purified air will be lead out from the top cone part. The aim of dedusting can be achieved.
Characteristics
(1) PP water film deduster is light and convenient to install. It is bargain quality merchandise.
(2) It is suitable for industrial boil, board making factory and chemical industries to recollect dusts.
Technique Data
Dedusting Efficiency: 95%
Dust Exhausting Thickness: <=180mg/m3
Ringelmann Blackness: 0-1 grade
Resistance: 700Pa-1000 Pa |
|
|
